STERILIZATION CHAMBERS (1 to 32 pallets)

Rectangular type, the chamber is designed to receive standard euro pallets 0,80 x 1,20 m in single row (STEROX A), or in double row (STEROX B or C).

Stainless steel construction (304 solid stainless internal plates) with internal chemical passivation providing a smooth clean aspect.

Single or double door with pneumatic lifting device for pit installation (sliding hinge with pneumatic cylinder) with local manual control of the doors. Silicon inflatable gaskets at each end, providing perfect vacuum tightness.

Double jacket for circulation of hot water around the chamber and on the doors.

Heat insulation of the doors supplied from the factory (polished stainless steel), other insulation to be installed locally (side walls of the chamber, top, including gas recirculation duct if the option is included).

The chamber will be pressure tested (for heating circuits) and vacuum tested in the workshop, prior to further testing.

 

Technical skids:

• Gas storage with weighing of the bottles and automatic inversion in the event of empty bottle
• EtO vaporiser
• Hot water production unit with water/steam heat exchanger
• Vacuum pumps skid ( pallet type or air cooled/ water ring)
• Clean steam generator
• Water treatment (softeners or reverse osmosis)
• Air compressor
• Nitrogen generator
• Gas leak detection network
• Download the explanation guide : gaz treatment

 

Control system and traceability of operation:

• Operator friendly control system
• Human machine interface based on easy operated touch screen colour panel
• PC connection for remote control and supervision
• Easy cycle programmation and process configuration with pass-code (21 CFR part 11 compliant)
• The whole process is controlled from the PLC
  (Programmable Logic Controller) giving a very high level of safety and reproductivity
• Multichannel (Two to six) linear chart recorder
  With possibility of data-storage from the chart recorder

Other Equipment

• Preconditionning Chambers
• Degassing Chambers
• Automatic loading/unloading conveyors
• Ventilation systems
• Direct Ethylene oxide monitoring by Infra Red gas analyzer

Pollution control equipment

• Scrubbers (Simple or multistage with absorption filters)
• Thermal burners
• Catalytic oxidation (Simple or with peak shaving buffer tank)